SICOM3009BA serial is designed for use in explosive atmospheres environment, low consumption, without housing. Comply with intrinsic safety, have advanced insulation performance, damp proofing, support fiber transmitting and forwarding, multiple redundant topology, remote monitoring, etc. Apply to explosive atmospheres, high dust, corrosive condition, such as coal mine, chemical factory, oil field and so on.
3 100Base-FX ports, 6 10/100Base-T(X) ports with RJ45 connecters.
Full load power consumption is as low as 3.9W.
Comply with IEC60079-11(GB3836.4) of explosive atmospheres.
Dry contact for warning signal,support NO and NC.
Support one key recovery
Embedded switch without housing
Software Functions | |
Switching | Support VLAN,PVLAN Support port trunking Support port flow control Support port speed limit Support broadcast storm control |
Redundancy | Support DT-Ring,DT-Ring+, DT-VLAN with the recovery time<50ms Support STP/RSTP |
Multicast | Support IGMP Snooping Support static multicast |
Network Security | Support SSH Support TACACS+ |
Service Quality | Support SP,WRR queue scheduling |
Management & Maintenance | Support Console, Telnet, WEB management methods Support SNMPv1/v2c/v3, Kyvision centralized management Support software upgrade by FTP Support power, port and ring alarm Support RMON Support port mirroring Support LLDP Support Link-check |
Clock Management | Support SNTP Client |
Technical Specifications | |
Standard | IEEE 802.3i(10Base-T) IEEE 802.3u (100Base-T and 100Base-FX) IEEE 802.3x(flow control) IEEE 802.1p(Class of Service) IEEE 802.1Q(VLAN) IEEE 802.1D(STP) IEEE 802.1w(RSTP) |
Switch Properties | Priority Queues: 4 Number of VLANs: 256 VLAN ID: 1–4093 Number of Multicast Groups: 256 MAC Table: 8K Packet Buffer: 1Mbit Packet Forwarding Rate: 5.4Mpps Switching Delay:<5μs |
Interface | Fast Ethernet Ports: 100Base-FX, SM/MM, SC/ST/FC connector 10/100Base-T(X), RJ45 port Console Port: RS232,RJ45 connector Alarm Contact: 2 pins used for alarm,input-mode,together with power input pins, 6-pin 5.08mm-spacing plug-in terminal block |
LED | LED on Front Panel Non-housing version support LED interface for user,Dimensions refer to hardware manual |
Button | Reset: system reset Default: system recover default configuration |
Power Requirements | Power Input: 3.3-5VDC(3-5.5VDC) Power Terminal: 6 pin 5.08mm spacing plug-in termianl block Power Consumption:<3.9W, 2.06W in idle Overload Protection: Support Inverse Protection: Support Redundancy Protection: Support |
Physical Characteristics | Dimension: 130mm×35mm×107mm(W×H×D) Weights: 0.3kg Mounting: Embedded mounting |
Environmental Limits | Operating Temperature: -40°C to +75°C Storage Temperature: -40°C to +85°C Ambient Relative Humidity: 5-95%RH. |
Quality Assurance | MTBF: 376,919 hrs Warranty: 5 years |
SICOM3009BA-EC-Ports-Connector-PS1-PS2 | |
EC | Non-housing and Conformal Coating |
Ports | |
3S6T | 3x100Base-FX, single mode fiber port; 6x10/100Base-T(X) RJ45 ports |
3M6T | 3x100Base-FX, multi mode fiber port; 6x10/100Base-T(X) RJ45 ports |
2S6T | 2x100Base-FX, single mode fiber port; 6x10/100Base-T(X) RJ45 ports |
2M6T | 2x100Base-FX, multi mode fiber port; 6x10/100Base-T(X) RJ45 ports |
Connector | 100M fiber port specifications |
SC05 | SC connector, multi-mode, 1310nm, 5km |
ST05 | ST connector, multi-mode, 1310nm, 5km |
FC05 | FC connector, multi-mode, 1310nm, 5km |
SC40 | SC connector, single-mode, 1310nm, 40km |
ST40 | ST connector, single-mode, 1310nm, 40km |
FC40 | FC connector, single-mode, 1310nm, 40km |
SC60 | SC connector, single-mode, 1310nm, 60km |
SC80 | SC connector, single-mode, 1550nm, 80km |
PS1-PS2 | |
L9-L9 | 3-5.5VDC(3-5.5VDC), Redundant Power Inputs |
Accessories | |
DT-FCZ-RJ45-01 | Dustproof cover for RJ45 port |