KIEN7009 is one of Kyland green low power consumption industrial Ethernet switch series. It is equipped with 3 100Base-FX optic ports and 6 10/100Base-TX copper ports, making it ideal for building a fast Ethernet fiber optic ring and leaving a spare fiber port for uplink use. KIEN7009 is a light managed device, supports DT-Ring, DRP/DHP, VLAN and other protocols to increase system reliability. It is designed especially for harsh environments with wide operating temperature range, EMC level 4, IP40 protection class, It certified by CE, FCC, UL508 and CID2, and can be deployed in wind power, distribution network, automation, transportation, oil & gas and many other industrial applications.
| Software Functions | |
| Switching | Support VLAN, PVLAN Support port flow control (New) Support port speed limit (New) |
| Redundancy | Support DT-Ring, DT-Ring+, DT-VLAN with the recovery time<50ms Support DRP/DHP with the recovery time<20ms Support STP/RSTP (New) |
| Service Quality | Support SP, WRR queue scheduling (New) |
| Management & Maintenance | Support Console, Telnet, WEB management methods Support SNMPv1/v2c/v3, Kyvision centralized management Support software upgrade by FTP and TFTP Support power, port and ring alarm Support RMON Support port mirroring (New) Support LLDP Support Link-check |
| IP Management | Support DHCP client (New) |
| Technical Specifications | |
| Standard | IEEE 802.3i(10Base-T) IEEE 802.3u(100Base-T and 100Base-FX) IEEE 802.3x(Flow Control) IEEE 802.1p (Class of Service) IEEE 802.1Q(VLAN) IEEE 802.1w (RSTP) |
| Switch Properties | Priority Queues: 4 Number of VLANs: 256 VLAN ID: 1–4093 MAC Table: 8K Packet Buffer: 1Mbit Packet Forwarding Rate: 1.4Mpps Switching Delay:<5μs |
| Interface | Fast Ethernet Port: 100Base-FX, SM/MM, SC/ST/FC connector 10/100Base-T(X), RJ45 port Console Port: Mini USB Alarm Contact: 3-pin 5.08mm-spacing plug-in terminal block,250VAC/220VDC Max,2A Max |
| Ethernet ports, fibre optic cables | Wavelength: 1310 nm (Fast Ethernet Basic) Output capacity in dBm: -20 dBm ...-13 dBm (MM) / -12 dBm ...-4 dBm (SM) (Fast Ethernet Basic) Receiver sensitivity: ≤-31 dBm (MM) / ≤ -34 dBm (SM) (Fast Ethernet Basic) |
| LED | LEDs on Front Panel Running LED: Run Alarm LED: Alarm (12/24/48VDC model only) Power LED: PWR1,PWR2 Ring LED: Ring Interface LED: Link/ACT, Speed (RJ45 port); Link/ACT(Fiber port) |
| Button | Reset: Reboot and restore default configuration |
| Power Requirements | Power Input: 100-240VAC, 50/60Hz; 110-220VDC(85-264VAC/77-300VDC) 24-48VDC(18-72VDC) 12-24VDC(9-36VDC) Power Terminal: 5-pin 5.08mm-spacing plug-in terminal block Power Consumption:<8.1w Overload Protection: Support Reverse Protection: Support Redundancy Protection: Support (12/24/48VDC) |
| Physical Characteristics | Housing: Metal Cooling: Natural convection, fanless Protection Class: IP40 Dimension: 53.6mm×135mm×106.5mm(W×H×D) (12/24/48VDC) 66mm×135mm×107.5mm (W×H×D) (220VAC/DC) Weight: 0.76Kg Mounting: DIN-Rail or Panel Mounting |
| Environmental Limits | Operating Temperature: -40°C to +85°C(12/24/48VDC) -40°C to +75°C(220VAC/DC) Storage Temperature: -40°C to +85°C Ambient Relative Humidity: 5-95% (non-condensing) |
| Quality Assurance | MTBF: 385000 hrs Warranty: 5 years |
| Approvals | CE(EMC), CE(LVD), FCC: Models with HV:100-240VAC,50/60Hz;110-220VDC UL508, Class I Div 2: Models with L2:24-48VDC CE(EMC), FCC: Models with L2:24-48VDC and L5:12-24VDC IEC 60950-1, EN 60950-1 |
| Industry Standard | EMI: FCC CFR47 Part 15,EN55022/CISPR22,Class A EMS: IEC61000-4-2(ESD) ±8kV(contact),±15kV(air) IEC61000-4-3(RS) 10V/m(80MHz–2GHz) IEC61000-4-4(EFT) Power Port:±4kV;Data Port:±2kV IEC61000-4-5(Surge) Power Port: ±2kV/DM, ±4kV/CM; Data Port:±2kV IEC61000-4-6(CS) 10V (150kHz–80MHz) Machinery: IEC60068-2-6 (Vibration) IEC60068-2-27 (Shock) IEC60068-2-32 (Free Fall) |
| KIEN7009-Ports-Connector-PS1-PS2 | |
| KIEN7009-Ports-Connector-PS1 | |
| Ports | |
| 3S6T | 3x100Base-FX, single mode fiber port; 6x10/100Base-T(X) RJ45 ports |
| 3M6T | 3x100Base-FX, multi mode fiber port; 6x10/100Base-T(X) RJ45 ports |
| 1S2M6T | 1×100Base-FX, single mode fiber port; 2×100Base-FX, multi mode fiber ports; 6×10/100Base-T(X) RJ45 ports |
| 2S1M6T | 2×100Base-FX, single mode fiber ports; 1×100Base-FX, multi mode fiber port; 6×10/100Base-T(X) RJ45 ports |
| 2S6T | 2x100Base-FX, single mode fiber port; 6x10/100Base-T(X) RJ45 ports |
| 2M6T | 2x100Base-FX, multi mode fiber port; 6x10/100Base-T(X) RJ45 ports |
| 2S4T | 2x100Base-FX, single mode fiber port; 4x10/100Base-T(X) RJ45 ports |
| 2M4T | 2x100Base-FX, multi mode fiber port; 4x10/100Base-T(X) RJ45 ports |
| 1S7T | 1x100Base-FX, single mode fiber port; 7x10/100Base-T(X) RJ45 ports |
| 1M7T | 1x100Base-FX, multi mode fiber port; 7x10/100Base-T(X) RJ45 ports |
| 8T | 8x10/100Base-T(X) RJ45 ports |
| Connector | 100M fiber port specifications |
| SC05 | SC connector, multi-mode, 1310nm, 5km |
| ST05 | ST connector, multi-mode, 1310nm, 5km |
| FC05 | FC connector, multi-mode, 1310nm, 5km |
| SC40 | SC connector, single-mode, 1310nm, 40km |
| ST40 | ST connector, single-mode, 1310nm, 40km |
| FC40 | FC connector, single-mode, 1310nm, 40km |
| SC60 | SC connector, single-mode, 1310nm, 60km |
| SC80 | SC connector, single-mode, 1550nm, 80km |
| NA | No 100Base-FX fiber port |
| PS1-PS2 | |
| L2-L2 | 24-48VDC (18-72VDC), redundant power inputs |
| L5-L5 | 12-24VDC (9-36VDC), redundant power inputs |
| PS1 | |
| HV | 100-240VAC, 50/60Hz; 110-220VDC (85-264VAC/77-300VDC), single power input |
| Accessories | |
| DT-BGAZ-02 | Panel for panel mounting |
| DT-FCZ-RJ45-01 | Dustproof cover for RJ45 port |
| DT-XL-Mini USB-USB-2m | Mini USB to USB cable for Console management, 2m |
Kyland-KIEN7009-Datasheet-EN.pdf KIEN7009(V1.3) & SICOM3009A(V1.3) & SICOM3306(V1.3) Industrial Ethernet Switch Hardware Installation Manual_V1.1.pdf SICOM3009A & 3306 & 3216 & KIEN7009 Series Industrial Ethernet Switches Web Operation Manual_V1.3.pdf
Mini USB driver.zip Image-KIEN7009-2546x2410px.zip
