SICOM3000TSN is TSN ready Layer 2 Managed Industrial Ethernet Switch, supports 2×10GBase-X SFP+, 4×100/1000Base-X SFP, 8×10/100/1000Base-T(X) RJ45, Auto-detection, Full/Half Duplex, MDI/MDI-X. SICOM3000TSN supports standard TSN protocols: IEEE 802.1AS PTP/IEEE 802.1Qbv/IEEE 802.1Qcc/ 802.1Qav. SICOM3000TSN supports IEEE1588 PTPV2, DRP (recovery time<20ms), RSTP/MSTP, VLAN, Multicast, QoS, SSH and many other Layer 2 software features, and supports CLI, Telnet, Web management methods, Network management software centralized management based on SNMPv1/v2c/v3. SICOM3000TSN is especially designed for harsh environments with wide operating temperature range, EMC level 4, IP40 protection class, strong vibration-resistent mounting clip for DIN-Rail installation, and can be deployed in Industrial automation, Power, Automotive electronics, Transportation and many other industrial applications.
Supports 2×10GBase-X SFP+, 4×100/1000Base-X SFP, 8×10/100/1000Base-T(X) RJ45, Auto-detection, Full/Half Duplex, MDI/MDI-X
Supports standard TSN protocols: IEEE 802.1AS PTP/IEEE 802.1Qbv/IEEE 802.1Qcc/ 802.1Qav
Supports RSTP/MSTP, DRP
Supports CNC centralized network configuration
Supports IP40
Operation Temperature: -40°C～85°C
Supports EMC Level 4 and IEC61850-3
| Software Functions | |
| TSN Time Sensitive Network Standards | Supports IEEE 802.1AS PTP Supports IEEE 802.1Qbv Supports IEEE 802.1Qcc Supports IEEE 802.1Qav |
| Switching | Supports VLAN, PVLAN Supports Flow Control Supports Port Rate Limit, Broadcast, Multicast, Unknown Unicast Storm protection Supports static and dynamic MAC address aging |
| Redundancy | Supports RSTP/MSTP Supports DRP, network recovery time <20ms Supports LACP (IEEE802.3ad) |
| Multicast | Supports IGMP snooping Supports GMRP Supports Static Multicast |
| Security | Supports IEEE 802.1x Supports HTTPs/SSL Supports SSH Supports local RADIUS server, remote RADIS Server forwarding Supports TACACS+ Supports unicast MAC filter |
| QoS | Supports ACL Supports Port based or protocol based QoS Supports 802.1p TOS/DiffServ, Supports SP, WRR |
| Maintenance & Management | Supports Console, Telnet, WEB Supports SNMPv1/v2c/v3 SNMPv3 Supports DES & AES Supports TCP/UDP, Ping, Trace route Supports firmware upgrade and configuration backup via FTP/TFTP/SFTP/HTTP/HTTPs Supports port mirroring and remote port mirroring Supports LLDP and LLDP MIB (802.1ab) Supports configurable MTU |
| Diagnosis | Supports hardware self-diagnosis Supports IP/MAC conflict alarm, power alarm, port alarm and Ring alarm Supports Syslog |
| IP Management | Supports IPv4 Supports DHCP server/option12 Supports Port Security over DHCP Supports DHCP-relay-agent/option 82/61/66/67 Supports BOOTP/Bootstrap Supports DHCP Relay Agent Information Option, Supports DHCP Client Supports ARP |
| Time Management | Supports hardware based IEEE1588 PTP Supports SNTP client Supports NTP client |
| Technical Specifications | |
| Standard | IEEE 802.3i (10Base-T) IEEE 802.3u (100Base-T and 100Base-FX) IEEE 802.3ab (1000Base-T) IEEE 802.3z (1000Base-SX/LX) IEEE1588 (PTP V2) IEEE 802.1AS IEEE 802.1Qbv IEEE 802.1Qcc IEEE 802.1Qav |
| Switching | Priority Queue: 8 Number of VLANs: 4K VLAN ID 1~4094 Number of Multicast Groups 8K MAC Table 16K Packet Buffer 1Mbit Packet Forwarding Rate 47.6Mpps Switching Delay <5μs Jumbo Frame 9.6Kbytes |
| Interface | 2×10GBase-X SFP+;4×100/1000Base-X SFP; 8×10/100/1000Base-T(X) RJ45 Console: RS232 RJ45 Alarm contact: 3-pin 5.08mm terminal block,250VAC/220VDC Max, 2A Max |
| LED | Running LED: Run Alarm LED: Alarm Power LED: PWR1,PWR2 Ring LED: Ring Interface LED: Link/ACT, Speed (RJ45 port); Link/ACT(Fiber port) |
| Button | Reset: Reboot and restore default configuration |
| Power | Power input voltage: L2 = 24-48VDC(18-72VDC) HV = 100-240VAC,50/60Hz;110-220VDC(85-264VAC/77-300VDC) Power Terminal 5-pin 5.08 mm-spacing plug-in terminal block (L2) 3-pin 7.62 mm-spacing plug-in terminal block (HV) Power Consumption <25W Overload Protection Support Reverse Protection Support Redundancy Protection Support |
| Physical Characteristics | Housing: Metal Cooling Natural convection, fanless Protection Class IP40 Weight: <1.25Kg Mounting DIN-Rail or Panel Mounting |
| Environmental Limit | Operating Temperature -40℃～+85℃ Storage Temperature -40℃～+85℃ Ambient Relative Humidity 5～95% (non-condensing) |
| Warranty | MTBF >300000h Warranty 5 years |
| Industrial Standard | EMI FCC CFR47 Part 15,EN55022/CISPR22,Class A EMS IEC61000-4-2(ESD) ±8kV(contact),±15kV(air) IEC61000-4-3(RS) 10V/m(80MHz～2GHz) IEC61000-4-4(EFT) Power Port: ±4kV;Data Port: ±2kV IEC61000-4-5(Surge) Power Port: ±2kV/DM,±4kV/CM;Data Port: ±2kV IEC61000-4-6(CS) 10V(150kHz～80MHz) Mechanical IEC60068-2-6(vibration) IEC60068-2-27(shock) IEC60068-2-32(free fall) IEC61850-3 |
|
Model |
SICOM3000TSN-Ports-PS1-PS2 |
|
Ports |
2X4GX8GE=2×10GBase-X SFP+ ports, 4×100/1000Base-X SFP ports, 8×10/100/1000Base-T(X) RJ45 ports |
|
PS1-PS2 |
L2-L2=24-48VDC (18-72VDC), redundant power inputs HV=100-240VAC,50/60Hz;110-220VDC(85-264VAC/77-300VDC), single power input |
Kyland-SICOM3000TSN-Datasheet-EN.pdf
