Product ImageProduct OverviewKey FeaturesSpecificationsMechanical DrawingOrdering InformationDownload
SICOM3028GPT-A
24G+4*10G port layer 2/3 managed rack mountable modular switches
Product Overview

SICOM3028GPT-A is a intelligent modular platform which is an All-in-One solution integrating IEEE1588v2, full gigabit, and both layer 2 & Layer 3 availability specifically designed to operate reliably in electrically harsh and climatically demanding utility substation and industrial environments. SICOM3028GPT-A supports up to 24 gigabit and 4 10gigabit ports or 28 gigabit ports, meets the IEC61850-3 and IEEE1613 standards. SICOM3028GPT-A is a 19-inch 1U rack mountable device and supports one 1U slot and six 0.5U slots which offers the maximum flexibility for easy expansion.
SICOM3028GPT-A supports IEEE1588 PTPv2 with hardware time stamping andsupports the BC, P2P TC, and E2E TC clock modes, it reaches a timing precision of 100 ns. It supports PTP Power Profile and supports many modules for time synchronous like HSR/PRP. SICOM3028GPT-A supports many Layer 2 software features such as port, VLAN, QinQ, multicast, QoS, DRP/DT-RING/MRP ring protocol, STP/RSTP/MSTP and Layer 3 functions such as VRRP, RIP, OSFP, IGMP and PIM. It supports Console, Telnet, Web management and network management software based on SNMP. At present, the product is widely used at the intelligent substation and many other industrial communication systems.
Key Features

Flexible modular design for easy expansion, supports max 24 gigabit and 4 10gigabit fiber/copper ports.
Supports DT-Ring, DRP, MRP, RSTP/MSTP and VRRP for network redundancy.
Supports Layer 3 routing protocols such as RIP and OSPF.
Supports IEEE1588v2 and the synchronization precision reaches ±100 ns, with HWbased PTP 1588.
Supports HSR/PRP module.
Supports Hot-Swappable Power Supplies.
Supports IEC61850 MMS.
Supports KyACB.
Support Profinet/Modbus TCP/ EthernetIP protocols.
Complies with the Cyber Security IEC62443-4-2.
Complies with IEC61850-3 and IEEE1613.
KEMA, CE, FCC.
Specifications
Software functions
Switching function Supports VLAN and PVLAN.
Supports GVRP
Supports port aggregation and LACP.
Supports flow control.
Supports broadcast storm suppression.
Supports QinQ.
Supports MAC address management.
Redundancy protocol Supports DHP and DRP and the recovery time<20 ms.
Supports DT-Ring, DT-Ring+, and DT-VLAN and the recovery time<50 ms.
Supports STP/RSTP/MSTP.
Supports MRP.
Multicast protocol Supports IGMP v1/v2/v3.
Supports GMRP.
Supports static multicast.
L3 function (part of sub-models support) Support IPv6.
Supports static routing.
Supports RIP v1/v2.
Supports OSFP v2.
Supports VRRP.
Supports PIM SM, PIM DM.
Security Supports IEEE 802.1x.
Supports HTTPS/SSL.
Supports SSH.
Supports SFTP client.
Supports RADIUS.
Supports TACACS+.
Supports user grading.
Supports MAC address binding.
Supports port isolate.
Supports security IP for Web/Telnet/SSH/SNMP service.
Supports IEC62443-4-2.
Service quality management Supports ACL.
Supports 802.1p(CoS), DSCP.
Supports priority mapping.
Supports SP and WRR queuing.
Management and maintenance Supports Console, Telnet, and Web(HTTP or HTTPs) management methods.
Supports SNMPv1/v2c/v3 and can managed by Kyvision.
Supports IEC61850 MMS management.
Supports TFTP server/client.
Supports FTP server/client.
Supports file transfer and software update over FTP and TFTP.
Supports the IP/MAC address conflict alarm, power failure alarm, power alarm, temperature alarm, port linkdown alarm, port traffic alarm, CRC and packet lose alarm, CPU alarm, memory alarm, Sfp port rx power alarm, transceiver alarm and ring alarm.
Supports Profinet, ModbusTCP, Ethernet/IP.
Supports port mirroring.
Supports DDM.
Supports loop detection
Supports CRC protection
Supports Syslog.
Supports RMON
Supports LLDP.
Supports Link-check.
IP address management Supports Bootp.
Supports DHCP server/client.
Supports Up to 16 different IP addresses and VLAN for system management.
Time synchronization Supports PTPv2 (IEEE1588-2008).
Supports Power profile (C37.238).
Supports NTP and SNTP.
Product Specifications
Standard IEEE 802.3i (10Base-T)
IEEE 802.3u (100Base-T)
IEEE 802.3ab (1000Base-T)
IEEE 802.3ad (port aggregation)
IEEE 802.3z (1000Base-SX/LX)
IEEE 802.3x (flow control)
IEEE 802.1p (priority)
IEEE 802.1Q (VLAN)
IEEE 802.1w (RSTP)
IEEE 802.1s (MSTP)
IEEE1588-2008 (PTPv2)
Switch properties Priority queue: 8
Number of VLANs: 4K
VLAN ID: 1–4093
Number of multicast groups: 1024
Routing table: 8K (L2 chassis do not involve)
MAC table: 32K
Packet buffer: 48Mbit
Switching delay: < 10 μs
Jumbo Frame Size: 10 KB
Interface Gigabit ports:
1000Base-X, SFP port, supports DDM
10/100/1000Base-T(X), RJ45 port
Fast Ethernet ports:
100Base-FX, single/multi mode, SC/ST connector
100Base-FX, SFP port(LC connector), supports DDM
10/100Base-T(X), RJ45 port
Console port: RJ45
Alarm contact: 3-pin 5.08mm-spacing plug-in terminal block, 250 VAC/220 VDC Max, 2 A Max,
10A@1s, 60 W Max
LED LED on front panel
Alarm LED: Alarm
Running LED: Run
Ring Role LED: Ring
KyACB LED: USB
Synchronization finish LED: Lock
Power LED: PWR1, PWR2
Port speed LED: Speed
Port LED: Link/ACT
LED on rear panel
Port LED: Link/ACT
Port speed LED: Speed
Power Requirements Power input:
24-48VDC (18-72 VDC)
100-240VAC,50/60Hz;110-220VDC (85-264VAC/77-300VDC)

Power terminal: 5-pin 5.08 mm-spacing plug-in terminal block

Power consumption: < 40 W

Overload protection: Support
Reverse connection protection: Support
Redundancy protection: Support
Hot Swappable: Support
Physical Characteristics Housing: Metal
Cooling: Natural cooling, fanless
Protection Class: IP40
Dimensions(W×H×D): 482.6 mm × 44 mm × 359.7 mm
Weight: < 10 Kg
Mounting: 19 inch 1U rack mounting
Environmental limits Operating temperature: -40°C to +85°C
Storage temperature: -40°C to +85°C
Ambient Relative Humidity: 5% to 95% (non-condensing)
Quality assurance MTBF:
359000h (SICOM3028GPT-L2GT)
368000h (SICOM3028GPT-L3GT)
Warranty: 5 years
Approvals KEMA,CE
IEC 62368-1, EN 62368-1
IEC 62439-3
Industry standard EMI
FCC CFR47 Part 15, EN55022/CISPR22, Class A
EMS
IEC61000-4-2(ESD) ±8 kV (contact), ±15 kV(air)
IEC61000-4-3(RS) 10 V/m (80 MHz-2 GHz)
IEC61000-4-4(EFT) Power Port: ±4 kV; Data Port: ±2 kV
IEC61000-4-5(Surge) Power Port: ±2 kV/DM, ±4 kV/CM; Data Port: ±2 kV
IEC61000-4-6(CS) 3 V (10 kHz-150 kHz); 10 V (150 kHz-80 MHz)
IEC61000-4-8 (power frequency magnetic field) 100 A/m(cont.), 1000 A/m(1s-3s)
IEC61000-4-9 (pulsed magnetic field) 1000 A/m
IEC61000-4-10 (damped oscillation) 100 A/m
IEC61000-4-12 (oscillatory wave) 2.5 kV/CM, 1 kV/DM
IEC61000-4-16 (common mode conduction) 30 V(cont.), 300 V(1s)
Machinery
IEC60068-2-6 (vibration)
IEC60068-2-27 (shock)
IEC60068-2-32 (free fall)
Climatic environmental
IEC60068-2-1 Cold test
IEC60068-2-2 Dry heat test
IEC60068-2-14 Change of temperature test
IEC60068-2-30 Damp heat cyclic test
IEC60068-2-78 Damp heat steady state test
Mechanical Drawing

Ordering Information

Product selection table

Sub-mode
Ethernet Ports
SICOM3028GPT-A-L2GT
Up to 28gigabit or 24gigabit + 4*10gigabit ports, L2 chassis
SICOM3028GPT-A-L3GT
Up to 28gigabit or 24gigabit + 4*10gigabit ports, L3 chassis

 

Ordering Information

Recommended model

Product Model
SICOM3028GPT-A-SM
SM: Sub-model
L2GT-MB: SICOM3028GPT 28G or 24G + 4*10G ports L2 chassis with timesynchronization
L3GT-MB: SICOM3028GPT 28G or 24G + 4*10G ports L3 chassis with timesynchronization
Hot-Swappable
Power Module
SM6.6-A-Power-PS
PS: power supply
HV=100-240VAC,50/60Hz; 110-220VDC(85-264VAC/77-300VDC), 1U
L2 =24-48VDC(18-72VDC), 1U

 

Slot 1:
SM6.6-A-Ports-1U
Ports:
4X = 4 x 10G Base-X, SFP+ ports, 1U
4GX = 4 x 1000Base-X, SFP ports, 1U
4GE = 4 x 10/100/1000Base-T(X) RJ45 ports, 1U
Slot2-Slot7:
SM6.6-A-Ports-Connector-0.5U
Ports:
4GX = 4 x 1000Base-X, 100Base-FX, SFPports, 0.5U
4SFP = 4 x 100Base-FX SFP ports, 0.5U
4GE = 4 x 10/100/1000Base-T(X) RJ45 ports, 0.5U
4S = 4 x 100Base-FX, single-mode fiber ports, 0.5U
4M = 4 x 100Base-FX, multi-mode fiber ports, 0.5U
4T = 4 x 10/100Base-T(X) RJ45 ports, 0.5U
Connector:
100M fiber port
SC05 = SC connector, multi-mode, 1310nm, 5km
ST05 = ST connector, multi-mode, 1310nm, 5km
SC40 = SC connector, single-mode, 1310nm, 40km
ST40 = ST connector, single-mode, 1310nm, 40km
Slot2-Slot7:
Function Module
 
SM6.6-A-HSR/PRP-GE-0.5U = Redbox module, 2 x 10/100/1000Base-T(X) RJ45 port
SM6.6-A-HSR/PRP-GX-0.5U = Redbox module, 2 x 1000Base-X,100Base-FX SFP port

 

Download